Workshop Tool Kit – Pro Max

What's Included

20+ professional workshop tools designed for wrap, signage, tint, and detailing applications.

ORGANISATION & WORKFLOW

1 x Vinyl Wrap Tool Belt With Waist Clip - Keeps all essential tools within easy reach while allowing full hands-free movement around vehicles, signage, or workshop setups. Adjustable for a secure and comfortable fit during long installs.

SAFETY & PROTECTION

1 x White Pro Wrap Gloves - Anti-static, lint-free gloves that reduce fingerprints, surface contamination, and friction for smoother vinyl handling and cleaner application control.

1 x Plastic Blade Disposal Container - Safe storage solution for used blades, helping maintain a clean, organised, and injury-free workspace.

MEASURE, CUT & PREP

1 x Pocket Tape Measure - Quick and accurate measurement tool for panels, signage layouts, trims, and wrap sections.

1 x Vinyl Cutter Tool - Designed for fast, clean straight cuts when prepping vinyl rolls or sheets.

1 x Knife (9mm 30° / Precision Blade System) - Precision trimming knife ideal for curves, edges, seals, badges, and detailed install work.

5 x NT Replacement Blades (30°) - Ultra-sharp replacement blades for consistent cutting performance and clean film trimming.

APPLICATION & SQUEEGEES

2 x Blue Squeegee With Felt Buffer - Smooth application tool designed to reduce scratches while delivering bubble-free vinyl installs.

1 x Yellow Wide Wing Edge Squeegee With Ruler - Combines alignment and pressure control for large panels and straight-edge accuracy.

2 x White Hard Flex Thin Squeegee - Ideal for tight trims, grooves, and curved surfaces where precision pressure control is required.

1 x Green Double-Sided Felt & Rubber Squeegee - Dual-function tool for air removal (rubber side) and final scratch-free finishing (felt side).

DETAILING & FINISHING TOOLS

1 x Precision Weeding Tool - Fine-tip tool for removing excess vinyl, small lettering, and intricate cut graphics.

1 x Sharp Tip Tweezers - Allows precise lifting and adjustment of small vinyl sections without damaging film integrity.

ADVANCED INSTALLATION TOOLS

1 x Vinyl Pressure Roller (4 Inch) - Applies firm, even pressure to lock in adhesive and eliminate stubborn air pockets during large installations.

1 x Edge Trimmer (90°) - Ensures clean, flush edge trimming around trims, seams, and door panels for professional finishes.

1 x Air Release Pen - Designed to release trapped air bubbles without damaging vinyl or leaving visible marks.

1 x Medium Vinyl Clip + 1 x Small Vinyl Clip - Holds vinyl securely in place during solo installations, improving alignment and workflow efficiency.

Who This Kit Is For

Built for installers working daily across multiple applications.

Perfect for:

Vehicle wrap installers

Signage and decal businesses

Window tint workshops

Detailing and PPF installers

Mobile installers needing a complete setup

High-volume production workshops

If you're handling multiple installs each week, this is the professional-grade setup designed to improve workflow and efficiency.

Step 1: Clip and Secure - Start by adjusting the Vinyl Wrap Tool Belt With Waist Clip to fit comfortably around your waist. Clip it on securely so you can move freely while keeping your essential tools within immediate reach throughout the install.

Step 2: Glove Up - Put on the White Pro Wrap Gloves before handling any vinyl or film. These anti-static gloves help reduce fingerprints, static cling, and surface contamination while improving grip and control during application.

Step 3: Measure and Mark - Use the Pocket Tape Measure to size up your working area accurately. Plan your layout and alignments using the Yellow Wide Wing Edge Squeegee With Ruler to establish straight, consistent reference lines before cutting.

Step 4: Hold Your Wrap in Place - Use the Medium Vinyl Clip and Small Vinyl Clip to secure vinyl to panels or edges while positioning or trimming. This stabilises the material and makes solo installations significantly easier and more accurate.

Step 5: Cut with Precision - Use the Stainless Steel 30° Knife for controlled, detailed cutting around curves, edges, and tight areas. Keep spare 30° NT Blades stored safely in the Blade Disposal Container so you can swap dull blades quickly and maintain clean, safe cuts.

Step 6: Trim and Slice - Use the Vinyl Cutter Tool for fast, straight cuts across larger sections of film or liner. For precise trimming along hard edges such as door frames, seams, or trims, use the 90° Edge Trimmer for clean, flush results without lifting the vinyl.

Step 7: Apply with Accuracy - Begin application using the Blue Squeegee With Felt Buffer to lay down larger sections smoothly without scratching the film. Follow with the Green Double-Sided Felt and Rubber Squeegee for bubble-free finishing. Use the White Hard Flex Thin Squeegee to work into corners, edges, and recessed channels where extra control is needed.

Step 8: Secure Adhesion - Once the film is in place, roll over the surface with the 4-inch Vinyl Pressure Roller to activate adhesive bonding and ensure full contact, especially on large flat panels.

Step 9: Pop Air Bubbles - If trapped air appears, use the Air Release Pen to gently release bubbles without damaging the vinyl surface. This allows for quick corrections during or after installation.

Step 10: Weed and Detail - For signage and decal applications, use the Precision Weeding Tool and Sharp Tip Tweezers to remove excess vinyl cleanly. These tools allow precise detailing without tearing or lifting your design.

Q: What industries is this kit suitable for?
The Workshop Tool Kit Pro Max is designed for wrap shops, signage installers, tint businesses, detailing workshops, and general vinyl application work.

Q: Is this suitable for beginners?
This kit is best suited for regular installers and businesses handling frequent install work. Beginners may prefer the Lite or Pro version first.

Q: Can this be used for signage and decals?
Yes. The included weeding tools, tweezers, cutting tools, and squeegees are ideal for signage, decals, lettering, and vinyl graphics work.

Q: Does this include replacement blades?
Yes. The kit includes 5 replacement NT Blades for ongoing precision cutting.

Q: What makes the Pro Max different?
The Pro Max includes a wider range of application tools, finishing squeegees, detailing tools, safety accessories, and workflow upgrades for higher-volume installation environments.

Professional Workshop Tools for Wrap, Tint & Signage Installers

The Workshop Tool Kit Pro Max is designed for professional installers and production workshops handling vehicle wraps, signage, vinyl graphics, window tinting, detailing, and surface applications across Australia.

Explore all workshop tools→

Whether you're working on vinyl wrap installs, automotive tinting, signage production, decals, paint protection film, or workshop detailing, having the right workshop tools improves efficiency, install quality, and workflow consistency.

Browse workshop kits→

This professional workshop tool kit includes cutting tools, application squeegees, prep accessories, weeding tools, safety equipment, and detailing tools used daily by wrap shops, tint installers, sign makers, and detailing businesses.

View cleaning tools→

The included workshop tools support vehicle vinyl wrap applications, signage graphics, window tint installs, decal production, and professional finishing work where speed, precision, and clean results matter.

See knives, cutters & blades→

For installers and businesses searching for “workshop tools Australia,” “vinyl wrap tools,” “signage install tools,” or “professional wrap tool kit,” the Workshop Tool Kit Pro Max delivers a complete professional setup built for high-volume workflow environments.